Tag: Waynecastle

Things to Look for When Buying a Heating System: A Tip from Blue Ridge Summit

Posted on by Larry & Sons

If you are in the market for a new or replacement heating system in Blue Ridge Summit and don’t know much about heating systems, you are not alone. Many homeowners are in the same boat as you. And many of that number put their trust in their local, professional, and qualified heating and cooling contractor to find the right furnace for their homes.

Before calling for an estimate, there are some things you can do to “prepare” yourself for one of the most important purchase you can make. Here is a checklist of things you should look for when buying a heating system.

Know your energy alternatives. There are lots of options today when it comes to heating your home. Gone are the days when the choices were so cut and dried. Check with your heating and cooling contractor for suggestions.

  1. Know what size your furnace should be. Furnaces are not “one size fits all.” The size of the furnace is determined by its Btu (British thermal unit) rating. For example, a one-story ranch home on a crawl space requires less heating capacity than a two-story colonial with a basement, thus it would require a furnace with a smaller numbered Btu rating. A home with a great deal of heat loss through windows and doors may require various furnace sizes. And don’t forget about insulation. Insulation can affect the furnace size, too. Again, check with your heating and cooling contractor for recommendations.
  2. How much room do you need for your furnace? Some homes have mechanical rooms for furnaces and water heaters while others utilize attics, basements, or crawlspaces for furnaces. If you think you need a big furnace to heat a big home, think again. Furnace manufacturers have been downsizing their heating equipment for years, while maintaining the same heating capacities. One example are wall hung boilers, which utilize water and electric as heating sources and are installed on a wall, making the unit easy to locate and easy to service – while at the same time being off the floor and out of the way.
  3. Will your heating system be “plug and play?” New furnaces can take the place of the ones they are replacing by using the same space. But sometimes a replacement unit may need some altering to fit into an existing duct system. It is almost a given that a new plenum (the part attaching the furnace to the ductwork) will have to be fabricated. But the new furnace may also require some other modifications to an existing duct system. You should understand this ahead of time and be prepared to pay additional costs.
  4. A box is a box is a box. As a rule, most heating systems are made the same. In some cases, one furnace manufacturer may produce several different brand names. The best “brand” is the heating and cooling contractor who installs and services your heating equipment. Do your homework ahead of time and find a qualified and professional contractor. Ask friends and family for recommendations. This is may be the most important thing to look for when buying a heating system

How Can I Get Better Flow from My Faucets? A Question From Gettysburg

Posted on by Larry & Sons

Most of us realize that a drain can get clogged or that the pipes in our Gettysburg home might require extra repairs every now and then, but rarely do we realize that when the faucet is not providing a strong, steady flow of water, it is likely because of a clog in the actual faucet. If you are suffering from low flow in your faucets or worse, sputtering and clogging, here are some tips to help fix the problem.

Why it Happens

The reason that so many faucets now have problems related to clogging is that they have been changed and redesigned over the years to reduce water flow. Older faucets would pour ridiculous amounts of water through the drain – not at all good for the environment. Today, aerators and other technology advancements greatly reduce the amount of water used, but also tend to cause these types of clogs.

Checking Your Aerator

The easiest way to fix a slow flowing faucet is to check the aerator tip for unwanted sediment. Despite filtration of tap water, over time small bits of sand, dirt, and other sediment can and will build up in the aerator. That sediment should be cleaned out of the tip of the aerator at least once a month to keep it from slowing the flow of water.

If a water main breaks somewhere or a problem occurs in the water supply outside of your home, this type of sediment might start to build up more rapidly and cause immediate clogs in your faucet. Other things that might build up include pieces of pipe or flux from plumbing joints that break free and enter the water supply. None of it poses a health problem, but it can be frustrating when it gets into your faucets and blocks the water supply.

Valve Cartridge

If the aerator is not the problem it may be in the valve cartridge. To fix this, you will need to replace the part. Each faucet can be very different, so you should refer to your owner’s manual (many of which are online) for how to take this part out of the faucet assembly. When you go to the hardware store, be sure to take the valve cartridge with you so you can get the exact piece you need for replacement.

The easiest way to avoid a clog in your faucets is to be careful with any repairs you make. While a water main break is not something you can control, you can control how the water supply is affected when someone does repairs on your home’s plumbing. Leave faucets open outside, turn the main valve back on slowly and check your faucet immediately after the repair to ensure no sediment gets clogged in the assembly.

How Do I Stop My Pipes from Knocking? A Question From Chambersburg

Posted on by Larry & Sons

Tell me if this sounds familiar – you are sleeping comfortably and in the middle of the night a soft but persistent knock sounds through the pipes in your Chambersburg home. At first it is easy to ignore, but inevitably the sound will grow with each passing night and eventually start keeping you awake. Luckily, there are simple solutions for knocking pipes that do not require a plumber or expensive parts.

First, it is good to know why your pipes are knocking in the first place. In most cases, knocking pipes are caused by variable water pressure in the main supply pipes coming into your home. That pressure is important because it keeps the water moving freely between pipes and into your faucets. However, when the air used in pressurizing those pipes leaks or is depleted, water moves suddenly and violently, creating the knocking sound as it traverses the length of the supply lines.

The easiest fix for this kind of knocking is to first turn off your main supply valve. Make sure you communicate to anyone in your home that you are shutting off the valve as it will stop ALL water coming in. Now, flush the lines by opening all of the faucets and flushing your toilets. Water can still leave your home through drainage pipes and this will ensure all of the supply lines are fully empty.

Once the lines are cleared, feel free to turn your main valve back on. It is important to do this slowly so that the air chambers between and around your pipes have time to refill before the water courses back into them. However, now that the pipes were fully emptied, the knocking sound should be completely gone.

It is as simple as that. In most cases, you should not need to call a plumber to help, but if you have any problems finding your main valve or shutting it off, a plumber can be helpful with the proper tools and the knowhow for various kinds of shutoff valves. Additionally, if you live in an apartment building or a shared space, you may not be able to perform this fix. Rather, you should contact your superintendent or landlord and make sure they know exactly what is happening – with any experience, they should recognize the problem and be able to make similar fixes to your pipes.

Knocking pipes can be incredibly frustrating if not dealt with as soon as they start. Now that you know how simple it is to make the fix, make a habit of regularly flushing your lines and the knocking likely will not start up again.

Do Heat Pumps Work for Air Conditioning? A Question From Waynecastle

Posted on by Larry & Sons

It’s possible that in the course of your search for a new air conditioning system in Waynecastle, you read or were told about heat pumps. Doesn’t sound right, does it – heat pumps providing cooling for your home? Regardless of the seeming misnomer, heat pumps are actually much older and more reliable cooling technology than you know. And once you understand how these units work, the name makes much more sense.

What Is a Heat Pump?

Technically every refrigerant containing air conditioner is some form of heat pump. A heat pump is a device that removes heat from one area and transfers it to another. So, in the case of your air conditioner, warm air cycles into the condenser, the heat is removed, and the cooled air is circulated back through your home. The actual science behind this is slightly more complicated, but the gist is simple – cold air isn’t produced and then pumped into your home; warm air is removed.

Your refrigerator and freezer operate under the same principle. It works so well that it’s been a standard technology for nearly 100 years, albeit with quite a few upgrades and enhancements. So, if an air conditioner already is a heat pump, why are these devices called something different? Because heat pumps can do so much more.

Heat Producing Heat Pumps

A true heat pump can work in two directions. It can extract heat from your home or it can extract heat from outside and pump it into your home. A true heat pump offers year round climate control because it both heats and cools – not too shabby if you think about the cost of a furnace and central AC system.

So, back to the main question – should you purchase a heat pump for your air conditioning needs? The short answer is “it depends”. For the most part, a heat pump is comparable to the same air conditioning model in terms of energy efficiency and capacity. The major difference is its ability to heat your home. So, if you are interested in ditching the furnace or boiler, it may be a great upgrade. If not, a standard air conditioner can get the job done equally well.