Have you ever noticed that U-shaped length of pipe below your bathroom or kitchen sink? Does it ever seem to you like it doesn’t make sense to have that in there? It seems counterintuitive to have the water run any direction other than straight down.
Well, that little bend is the drain trap, and it keeps nasty odors and gases from wafting their way up through the plumbing and into your home. The U shape of the trap precludes the normal upward drift of the gases, so they don’t make it up through your drain.
After a while, these traps can become corroded, choked with debris or entirely clogged to such a degree that it needs to be replaced. When this happens, it is important to take care of this right away.
As with any plumbing project, if you have little experieince with this type job, call a professional Hagerstown plumber.
Here are the steps they will take to replace your drain trap:
- The first step is to turn off the main water supply.
- Next, they will remove all the pieces of the existing drain trap. Use a pipe wrench and/or slip-joint pliers to remove the nuts and pull the trap free. Attach a tailpiece washer to your new tailpiece, and then attach the tailpiece to the sink strainer.
- With a slip nut and washer, affix the trap arm to the drain stub.
- Finally, they will attach the trap bend to the trap arm, making sure the beveled face of the washer faces the trap bend.
- Tighten all the nuts and turn the water back on. Run a little water down the drain and check for leaks before using it.
Once everything is all sealed up, you’re good to go! Your new drain trap is in place and ready to use. If you need any plumbing repairs or replacements in Hagerstown, call Larry & Sons Plumbing, Heating & Air Conditioning!
When you think of water filters, you may imagine a faucet attachment or a pitcher with a filter installed. But there is an easier and more convenient way to provide filtered water to all areas of your house, and that is a whole house water filter system. These units are becoming more and more popular as people begin to realize that it is not just the water you drink that needs to be filtered. In fact, there are many reasons that you may want to filter the water you shower and wash your clothes in as well.
Impurities in your water can affect you and your family even if you do not drink it. And that is why whole house water filtration systems remove contaminants from your water before it even comes near any of the faucets in your home. These types of systems are attached by your Frederick plumber to the main water source for your home and can treat the water as it comes in and before it is distributed elsewhere.
These are generally simple systems, which makes them relatively inexpensive to install and maintain. Of course, your filter will need to be changed on a regular basis and that is an ongoing expense. But most of these filters are designed to filter between 10,000 and 100,000 gallons of water. While each filter will come with a recommendation for how often it needs to be replaced, it is important to remember that you may need to replace yours sooner rather than later depending on the amount of contaminants in your water supply.
You can also get different types of filters depending on the kinds of contaminants you are most concerned with removing from your indoor water. For instance, some water filters are better for removing bacteria and viruses, while others will do a better job of eliminating things like iron or other specific types of minerals and chemicals.
There are many good whole house water filtration systems out there, but finding the right one for your home can be tricky. For that reason, it is a good idea to consult with a professional Frederick plumber like Larry & Sons who can help you determine which product is right for your home.
If you rely on a well for your Blue Ridge Summit home water needs, it is absolutely essential that you can depend on your well water pump at all times. The simple fact is that without a reliable well water pump, you will not have any guaranteed access to running water in your home, and that is a situation that you will want to avoid at all costs.
For this reason, it is important to take certain factors into consideration when you are having a well water pump installed. To begin with, you want to make sure that the unit you choose is high quality and has a reputation for durability and reliability. There are many good well water pumps out there, but there are also some that may not quite measure up. Make sure you thoroughly examine your options and consult with a professional before you make your final decision.
Another important thing to remember is that you need a pump that is big enough to accommodate the water needs of your household. You could get a great, top of the line product, but if it is not big enough, you will have endless problems with your water supply. A smaller system will also have to work harder to keep water flowing into your home and is likely to wear out faster as a result.
The power that the well water pump you choose has needs to match up with the depth of your well. If you have a very deep well, you will need a more powerful pump to get the water up and into your home. Of course, both larger and more powerful pumps tend to be more expensive, but it is worth it to pay the extra up front than to have a chronically insufficient water supply to your home.
There simply is no substitute to having a well-sized, high-quality well water pump installed for your home. This is a purchase that will impact your quality of life for many years going forward, so it is worth taking some time to evaluate your options and collecting professional opinions so you can be sure you are going with the best product.