It may be a while before your hats and gloves come out for the winter, but as summer comes to an end, it’s important to start thinking about your furnace service. Temperatures plummet during fall and winter, and you don’t want to discover a furnace problem when you need it most!
Now is a good time to perform a basic checkup and some standard maintenance to make sure you’ll have heat in the coming months. Give your furnace some TLC now, and you’re less likely to have problems later!
End of Summer Furnace Maintenance
Replace your filters. Even if you do nothing else, change your filters. Regular filter changes keep HVAC systems running smoothly. Dirty filters cause the system to work harder, often resulting in premature failure.
Make sure your vents are clear. Obstructed supply vents can’t release warm air. Make sure all the vents in your home are unblocked by furniture, drapery, etc.
Check blowers and burners. Dust builds up on furnace burners during the summer. Before your furnace kicks on for the first time this season, remove dust and other debris to prevent a potential fire hazard. Also, make sure the burner is rust-free and properly aligned. Oil the blower motor to prevent unwanted noise and keep it running smoothly.
Schedule a furnace maintenance checkup. If you aren’t familiar with how your system works, we recommend scheduling a professional HVAC checkup. A technician will go over your furnace and your entire HVAC system to make sure everything is in good working order and make recommendations as needed. Checkups are an important part of maintaining your furnace because they allow professional to detect minor problems before they become major. Check out our maintenance program!
Hagerstown Furnace Maintenance
You might not be ready to see summer come to an end, but cooler days will be here soon. Contact us today for Hagerstown furnace maintenance to ensure that your heating system won’t fail on the first cold day of the season. Call 301-733-5428.
Furnace maintenance may not be the first thing on your mind when the weather starts getting warmer, but it should be a part of your spring to-do list. Taking care of your furnace each spring helps ensure that it will work like it should when fall and winter come back around. While modern furnaces are quite reliable, a little TLC helps keep them running their best. Here are a few basic spring furnace maintenance tasks you should tackle before shutting the system down for the season.
Clean Your Air Ducts
Dirty air ducts decrease furnace efficiency and can drive up your heating bill while reducing the system’s lifespan. They can also cause respiratory problems, especially people with asthma and allergies. Spring is the perfect time to have your home’s air ducts cleaned since this task will also ensure that your ducts will be in good condition when you start up your air conditioner.
Inspect Your Furnace’s Belts
Your furnace has belts that are responsible for running the blower. They play an important role in the overall functionality of your heating system, so it’s a good idea to check to see that they are tight and aligned properly. Look for wear, and replace any that appear to be thinning or cracked. You should also replace any belts that no longer fit tightly. Remove debris and dust from around the belts as well as the fan blades.
Check Your Thermostat’s Batteries
If you have an electric thermostat, spring is a good time to make sure the battery is still in good condition. If the battery is dying, it could cause temperature fluctuations. In addition to having a negative impact on your comfort, these fluctuations can decrease your system’s efficiency and drive up your bill.
Get a Furnace Tune-Up
If it’s been a while since you’ve had your furnace professionally inspected, schedule a tune-up. At Larry & Sons, we offer professional furnace tune-ups in Hagerstown and the surrounding areas, and we can help you make sure your furnace will be in good working order for next year. Contact us today to learn more.
Fall is here, and we have already had some pretty chilly nights here in the Frederick area. Before we know it, we will be cranking up our furnaces to keep the chill at bay. If you haven’t given your heating system much thought since you switched if off last spring, now is the time to check it over and make sure it’s ready for the upcoming months. Here are a few easy fall furnace maintenance tips to help you get your heating system ready for colder weather.
Fall Furnace Maintenance
Replace your filter. Furnace filters becoming clogged with dust, pet dander, hair and other debris over time. The more blocked the filter is, the harder your heating system has to work to heat your home. If it’s been a while since you last replaced your furnace filter, we recommend changing it before cranking up the heat for the first time this season.
Make sure your vents are unobstructed. If heavy drapes, furniture or miscellaneous clutter are blocking your wall or floor vents, airflow may be restricted. Make sure your vents are not blocked to ensure that your furnace can heat your home evenly.
Check your thermostat. Older thermostats don’t always work like they should. Sometimes, they fail to correctly read the temperature or keep your furnace running as efficiently as it should. Test yours, and if you find that it is no longer working correctly, consider upgrading to an energy efficient programmable thermostat.
Schedule a furnace tune-up. Prevent winter breakdowns with a tune-up. When you have your furnace tuned up by Larry & Sons, your technician will thoroughly examine the system take preventative measures to make sure it is good health.
Winter is an expensive time of year for most homeowners. By tackling some basic heating maintenance, though, you may be able to avoid a costly mid-winter heating repair. With the four fall furnace maintenance tips listed above, you can prepare your system to keep your family warm and comfortable all winter long. For help with furnace maintenance in Hagerstown, contact Larry & Sons today. Call 301-733-5428.
The temperatures are steadily decreasing, and before long, you’ll be switching your furnace on for the first time this season. Chances are, it will come on without a problem, but what happens if your furnace won’t turn on? Do you know what to do when yourfurnace won’t turn on in Hagerstown?
A furnace that won’t turn on is a fairly common problem, and fortunately, it’s often easy to fix. Here’s what to do if your furnace doesn’t fire up like it should!
What to Do When Your Furnace Won’t Turn On
Check Your Circuit Breakers. Even if you use a gas or propane furnace, some of the components run on electricity. If your furnace doesn’t switch on, the circuit breaker could be shut off. Check your circuit breaker panel to make sure all switches for your HVAC system are set to “ON.”
Check Your Thermostat. If your furnace isn’t turning on, the thermostat may have lost its programming or reset. It may even simply be set on the wrong setting. For test purposes, set your thermostat about 10 degrees hotter than the current temperature to see if the system turns on. Also, double check to make sure it’s set to “HEAT.”
Check the Drain Pan. Drain pans collect water that has been removed from the air by your HVAC system. When the system is working as it should, the water should be pumped out or drain out automatically. If the pan is full of water, a triggered float switch could be preventing your furnace from turning on. If this is the case, make sure the pan’s drain is clear or that the pump is working properly.
Check Your Air Filter. If you’ve been neglecting your air filter, it could be seriously clogged, and a safety feature may be preventing your system from turning on.
Check the Pilot Light. Many modern furnaces won’t kick on if the pilot light is out. This is a safety feature designed to prevent pumping natural gas or propane into your home.
Check Your Natural Gas or Oil Supply. Lack of fuel could prevent your furnace from turning on. The best way to check your fuel supply is trying another gas appliance in your home, such as your stove. If it doesn’t work either, contact your gas or propane company.
When to Call for Professional Furnace Repair
If you’ve checked everything above and your furnace still won’t turn on or if you can smell gas or propane, you need help from a professional HVAC technician. For furnace repair in Hagerstownand the surrounding areas, depend on Larry & Sons for fast, affordable help when your furnace won’t turn on, call us today!